Power Cable; Advice To The Installer; Connections To Various Main Power Supplies - Eurotec DOMINA 700 Série Instructions Pour L'installation, L'emploi Et L'entretien

2.3.3

POWER CABLE

The unit is delivered fitted for the following power: 1N AC 220...240 V 50/60 Hz.
The specifications of the power supply connection flexible cable must match or be superior to those of the cable with rubber
insulation H07RN-F. Introduce the cable through the cable clamp and secure it firmly. During operation, the power supply
voltage should not differ from the voltage rating by +/-10%.
The unit is supplied with a cable with the specifications given in Tab. 3 (page 7); to access the terminal block or replace it, it
is necessary to:
- remove the front panel
- connect the supply cable to the terminal block according to need, following the instructions given on the label located near
the terminal block and in this handbook.
2.3.4

ADVICE TO THE INSTALLER

- Activate the unit according to the use instructions, and explain its operation to the user by consulting the instruction
booklet, illustrating also any manufacturing and/or functional modifications.
Leave the instruction booklet with the user, advising that he/she should refer to it for any future consultation.
2.3.5

CONNECTIONS TO VARIOUS MAIN POWER SUPPLIES

1N AC 220...240 V 50/60 Hz
GB
POWER SUPPLY CABLE
MODEL
SUPPLY VOLTAGE TYPE
1N AC 220...240 V 50/60 Hz
ELECTRICA DIAGRAMS
DRAWING N°
PE (earth)
N
L
1
ECC 477
Max.
n° cables
A/f mm
1,1 3 x 1,5
1348
- 12 -
yellow-gree
(NP) blue
(R) brown
2