Technical Data; Table I: Potato Heater Hot Container Tecnical Data; Technical Characteristics; Installations Instructions - Eurotec DOMINA 700 Série Instructions Pour L'installation, L'emploi Et L'entretien

1.
1.1

TABLE I: POTATO HEATER HOT CONTAINER TECNICAL DATA

MODEL
400 x 700 x 290/425
ECC 477
*SUPPLY VOLAGE: 1N 230 V 50/60 Hz
N.B.: the input power with 1N 220 V 50/60 Hz is approximately 9% lower than the figures given
the input power with 1N 240 V 50/60 Hz p circa del 9% higher than the figures given
1.2

TECHNICAL CHARACTERISTICS

STRCTURE
Frame made of AISI 304 stainless steel, panels and base of stainless steel, mounted on height-adjustable feet.
CONTROL KNOB made of non-conducing material.
2.
Installation must be performed by qualified persons in accordance with current regulations.
WARNINGS:
If the unit is installed against a wall, the wall needs to withstand temperatures of 100°C and must be fireproof; if not, it is
essential to install thermal insulation.
Before proceeding with the installation, remove the protective plastic film and eliminate any adhesive residues by means of
a suitable product for cleaning stainless steel.
Install the unit horizontally, correct positioning is obtained by turning the levelling feet.
The various units may be installed separately or combined with other units in the range.
- This unit is not suitable for encasing.
2.1

POTATO HEATER HOT CONTAINER DATA PLATE

The technical data plate is on the back of the
unit.
2.2

LAWS, REGULATIONS AND TECHNICAL DIRECTIVES

The following regulations must be observed during installation:
- Current accident and fire regulations.
- The regulations of the electricity supply company.
- Health regulations.
- Electrical systems standards.
GB
DIMENSIONS in mm
outside
LxDxH/H max
310 x 510 x 160
INPUT
POWER
tank
LxDxH
INSTALLATION INSTRUCTIONS
V
KW
- 10 -

TECHNICAL DATA

NET
WEIGHT
kg.
W
350 25
Mod.
Matr. N°
HZ