Delivery Scope; Intended Use; Tool Specifications - Würth EWS 7-115 BASIC Traduction Des Instructions De Service D'origine

Symbol Meaning
Always wear ear protection.
Wear safety glasses/goggles
Movement direction
Apply strength for the workstep.
Switching On
Switching Off
On/Off switch lock-on
Releasing the lock-on function of the
On/Off switch
Prohibited action
Permitted action
Next step of action
P Rated power input
1
P Output power
2
n Rated speed
l = Grinder spindle length
d = Grinder spindle diameter
1
D = Max. grinding disc diameter
d = Inner disc diameter
2
Restarting Protection
Additional information
Symbol Meaning
Surface grinding
Grinding/sanding with sanding sheet
Weight according to EPTA-Procedure
01/2003 with vibration-damping auxil-
iary handle
Weight according to EPTA-Procedure
01/2003 with standard-auxiliary handle
/II Symbol for protection class II (com-
pletely insulated)
L Sound power level
wA
L Sound pressure level
pA
K Uncertainty
a Vibration total value
h

Delivery Scope

Angle grinder, protection guard, auxiliary handle.
Special protection guards, application tools and other acces-
sories shown or described are not part of the standard deliv-
ery scope.
A complete overview of accessories can be found in our
accessories program.

Intended Use

The machine is intended for roughing metal, stone and
ceramic materials and for drilling tiles.
For cutting with bonded abrasives, a special cutting guard
(accessory) must be used.
When cutting in stone, provide for sufficient dust extraction.
Together with the hand guard (accessory), the machine can
be used for brushing and grinding/sanding with elastic sand-
ing plates.
The machine is suitable only for working without water.
For damage caused by usage other than intended, the user is
responsible.

Tool Specifications

The tool specifications of the machine are listed in the table on
page 254.
The values given are valid for a nominal voltage [U] of 230 V.
For different voltages and models for specific countries, these
values can vary.
18