Operation; General - Renkforce A-1000 Mode D'emploi

9. Operation

Only take the device into operation after familiarising yourself with its functions and these
operating instructions.
Check all the connections again.
Please note that sound controls that are turned up very high already require very high perform-
ance of the amplifier even at medium volume and can easily oversteer it. This shows in the form
of distortions that endanger the speakers.
In case of high volumes and/or highly turned-up sound controls, check for distortions and turn
down the volume control or the sound controls immediately to prevent damage to the speakers.
a) General Information
(1) POWER button
This button switches the amplifier on and off.
Position ON > Device is switched on, Position OFF > Device is switched off.
(2) Display FUNCTION
This display shows the selected audio input.
If the volume setting is changed, the display visually shows the volume level. The display returns
to the marking of the selected audio input after a short time.
33