Cancellation of the delay mode
If you wish to end the delay mode prematurely, press
the flashing button of the selected delay mode time for
3 seconds. The LED indication changes from flashing to
continuous and the delay mode is cancelled.
Extractor power level
− The motor of hood has 4 speed levels.
− With buttons
1
2
3
level.
− The flashing button
indicates the Power position. The
4
Power position is only used if there are strong odours,
or a lot of smoke or vapour. Its use must be kept to a
minimum because of the large extraction of air in this
position.
− The Power position automatically goes back to speed
three after 5 minutes
− The illuminated buttons shows the level in use.
− The motor has a thermal switch that switches the motor
off with overheating. After cooling the motor will switch
on again.
Determining the cause of overheating is re-
quired. This can be caused for example by a
pan fire, the impeller motor being blocked or
an object getting in the exhaust opening and
causing it to be partly or fully blocked.
2.3 Lighting
Turning the lighting on and off
To turn the lighting on or off press
The light works independent of the motor.
4
you can choose the speed
.
L
3 CLEANING AND MAINTENANCE
Follow all instructions as described in the Con-
ditions for Safety and Use section.
Follow the cleaning instructions below for a
longer working life and optimal operation of the
appliance.
3.1 General maintenance
Allow the lighting to cool down sufficiently be-
fore you start cleaning the extractor hood.
Never use aggressive, abrasive or chlorinated
products.
Do not use a high pressure or steam cleaner.
Stainless steel
Clean with a cleansing tissue with mild cleaning agent
then dry with a soft cloth. Maintenance of the stainless
steel can be performed with the Novy cleaner (906060).
Coated parts of the extractor hood
The extractor hood can be cleaned with a damp cleansing
tissue and a mild cleaning agent.
Glass
Glass parts of the extractor hood can be cleaned with
a soft cloth and a glass cleaner.
3.2 Grease filter
If the following instructions are not carried out,
serious soiling can cause a fire hazard.
Indication cleaning grease filter
Indication: 4 indicator lights stays on
After 30 hours of running the motor, when the cooker hood
is switched off, 4 indication LEDs on the speed buttons
remain lit for 30 seconds. This indicates that the grease
filter(s) must be cleaned.
– 30 –