Technical Data - Vega VIB S 61 Manuel De Mise En Service

8 Supplement

8.1 Technical data

General data
Material 316L corresponds to 1.4404 or 1.4435
Materials, wetted parts
Process fitting
-
Vibrating rod
-
Extension tube
-
Process seal
-
Materials, non-wetted parts
Housing
-
Housing cover
-
Seal between housing and
-
housing cover
Ground terminal
-
Sensor length (L)
Weight
Max. lateral load
Output variable
Relay output
Turn-on voltage
-
Switching current
-
Breaking capacity
-
Contact material
-
Instruction
-
Transistor output
Turn-on voltage
-
Switching current
-
Blocking current
-
Modes (adjustable)
Switching delay
Ambient conditions
Ambient temperature
Storage and transport tem-
perature
VEGAVIB S 61
316L
316L, 318 S13 (1.4462)
316L
Klingersil C-4400
plastic PBT (Polyester)
Plastic PA 12 (polyamide, clear)
Silicone
316L
148, 500, 1000 or 1500 mm (5.827, 19.69, 39.37, 59.06 in)
approx. 1150 g
400 N
2 floating spdts (DPDT)
min. 10 mV / max. 253 V AC/DC
min. 10 µA / max. 3 A AC, 1 A DC
min. 50 mW / max. 750 VA, 54 W
AgNi or AgSnO and Au plated
If inductive loads or stronger currents are switched through, the gold
plating on the relay contact surface will be permanently damaged. The
contact is then no longer suitable for switching low-level signal circuits.
Floating transistor output
max. 55 V DC
max. 400 mA
< 100 µA
min./max.
ON: approx. 0.5 sex. / OFF: approx. 1 sec.
-40 ... +80 °C
-40 ... +80 °C
Supplement
19