Wiring Diagram; Switch Positions - hergom Compact SERE 100 2C Instructions D'installation, De Service Et D'entretien

3 - WIRING DIAGRAM

SWITCH POSITIONS

POSITION "0": the fans start up at MEDIUM SPEED
AUTOMATICALLY when the fire is lit and the
temperature reaches 50ºC (in the area where the
thermostat is located). When the flame goes out
and the temperature falls below 50 °C, the fans
stop.
This position is RECOMMENDED when the user
wants the fans to stop working once the compact
fireplace has cooled off.
POSITION "1": the fans start-up at MEDIUM SPEED
MANUALLY. In this position, the fans do not stop
even if the fire goes out and the temperature falls
below 50°C.
POSITION "2": MANUAL start-up of the fans at
FULL SPEED.
In this position the fans will not stop working even
if the fire has gone out and the temperature has
A - AZUL / BLUE / BLEU / AZUL
R - ROJO / RED / ROUGE / VERMELHO
V - AMARILLO-VERDE / YELLOU-
GREEN / JAUNE-VERT / AMARELO-
VERDE
N - NEGRO / BLACK / NOIR / PRETO
M - MARRON / BROWN / MARRON
/ CASTANHO
fallen below 50 ºC.
This position is recommended when a quick
transfer of heat from the fireplace to the room is
required.
HOW TO USE SWITCHES
You can turn the fan on from either of the two
switches. Once you select the POSITION "1" from
one of the switches, you can only increase the
speed to POSITION "2" from the other switch. If
you want to turn the fan off, you will have to do it
from the first switch you pushed.
SWITCH