hergom Compact SERE 100 2C Instructions D'installation, De Service Et D'entretien page 17

9. Connect both switches to the cabling as per the
electrical diagram shown in paragraph 5. Do
not change the position of the connectors.
10. Remove the central screw from the fan cover
that was removed in point 2, fit the thermostat
and connect the cabling as per the electrical
diagram shown in paragraph 5:
11. Put the fan covers, the base and the grid back
on. Take extra care with the vermiculite pieces,
as they may break.
FIG. 7
FIG. 8