Technical Data; Safety Features; Sparks On The Tip/Work Piece; Internal Temperature - Walter Surface Technologies SURFOX TURBO Manuel De L'utilisateur

Technical Data

Technical Data
MODEL: SURFOX TURBO
PART NUMBER: 54-D 045
AMPERAGE: 120V, 50/60 Hz
OUTPUT AMPERAGE: 12-30V AC
INPUT CURRENT: 4 Amps
OUTPUT CURRENT: 20 Amps
12

Safety Features

Safety Features
A) Sparks on the tip/work piece
To avoid short circuits (arcing), the machine automatically
stops when the insert touches the work piece (metal to
metal contact). If the amperage sharply increases creating a
short, the system will automatically cut the power to the tip
to avoid any damage to the equipment.
B) Internal temperature
To protect the internal components of the machine, there
are temperature sensors inside the machine. If the operat-
ing temperature is too high, the machine will shut down
and restart by itself when the temperature reaches an
acceptable level. There is an internal fan inside the machine
to keep all the components cool.
WARNING! The inside temperature can
increase for many reasons: high ambient
temperature, lack of proper air circulation
around the machine, fluctuations in
amperage, electrical set-up in the shop, etc.