Table des Matières
Publicité
Messages d'erreur SCPI
Use FUNC:USER to select a user arb before selecting USER as modulation function. Modulation disabled.
-213 INIT ignored
-203 Command protected; Enter calibration password from front panel calibration menu (série 33500 uniquement)
-203 Command protected; instrument must be unsecured (série 33600 uniquement)
-203 Command protected; requires license BWD (série 33600 uniquement)
-203 Command protected; requires license SEC (série 33600 uniquement)
-203 Secure option: Instrument security is unlocked
-115 Invalid parameter; Parameter not supported on one channel instrument
-114 Header suffix out of range
100 Network Error
110 LXI mDNS Error
201 Memory lost: stored state
202 Memory lost: power-on state
203 Memory lost: stored measurements
263 Not able to execute while instrument is measuring
291 Not able to recall state: it is empty
292 State file size error
293 State file corrupt
301 Cannot reset input protection; high voltage present
305 Not able to perform requested operation
514 Not allowed
514 Not allowed; Instrument locked by another I/O session
521 Communications: input buffer overflow
522 Communications: output buffer overflow
532 Not able to achieve requested resolution
540 Cannot use overload as math reference
550 Not able to execute command in local mode
560 No valid external timebase
561 High voltage present on input channel
570 DDS Processor is not responding
580 Reference phase-locked loop is unlocked
581 Waveform DAC Timing is unlocked (série 33600 uniquement)
581 Waveform DAC Timing regained lock (série 33600 uniquement)
582 The DATA controller failed to lock for WFDAC (série 33600 uniquement)
468
Guide d'utilisation et de maintenance Agilent Série Trueform
Publicité
Table des Matières
