Publicité
Les langues disponibles
Les langues disponibles
6
Electrical connection
WARNING
Risk of accident if the machine is operated us-
ing unauthorised voltages or frequencies.
f
The mains voltage and the frequency of the
power source must correspond with the
specifi cations on the machine's name plate.
f
In North America, only Festool machines with
voltage specifi cations of 120 V may be used.
CAUTION
Risk of injury, electric shock
f
Never connect the plug to an unearthed sock-
et.
f
Always use extension cables with a protective
earth conductor.
The switch/connector unit [4-1] activates the
power supply and switches the electric pow-
er tool installed in the MFT/3-VL on and off.
f
Insert the plug [4-5] into an earthed socket.
f
Connect the electric power tool installed in the
MFT/3-VL to the plug [4-4].
f
Press the green button [4-2] to switch ON.
f
Press the red button [4-3] to switch OFF.
The switch/connector unit is fi tted with a zero
voltage actuator which prevents the power from
being restored automatically when the power
supply is interrupted (e.g. after a power failure).
After an interruption in the power supply, press
the green button to switch the machine ON.
7
Accessories
Use only original Festool accessories and Fes-
tool consumable material intended for this ma-
chine because these components are designed
specifi cally for the machine. Using accessories
and consumable material from other suppliers
will most likely affect the quality of your work-
ing results and limit any warranty claims. Ma-
chine wear or your own personal workload may
increase depending on the application. Protect
yourself and your machine, and preserve your
warranty claims by always using original Fes-
tool accessories and Festool consumable ma-
terial! The order numbers of the accessories
and tools can be found in the Festool catalogue
or on the Internet under "www.festool.com".
10
8
Disposal
Do not throw the appliance in your household
waste! Dispose of machines, accessories and
packaging at an environmentally responsible re-
cycling centre. Observe the valid national regu-
lations.
9
Warranty
For our tools, we give warranty for material and
production defects in accordance with the lo-
cally applicable legal provisions, but in any case
for at least 12 months. Within the EU member
states, the warranty period is 24 months (veri-
fi cation through invoice or delivery note). Dam-
age caused by the operator, natural wear, over-
loading, incorrect handling or through the use
of the equipment not specifi ed in the operating
manual, or damage which was known at the
time of purchase, is not covered by the warranty.
Furthermore, damage caused by the use of non-
original accessories and consumable materials
(e.g. sanding pads) is also excluded. Complaints
can only be recognised if the tool is returned
while still assembled to the supplier or an au-
thorised Festool Customer Service workshop.
Keep the operating manual, safety instructions,
spare parts list and purchase receipt in a safe
place. Otherwise the respective, current war-
ranty conditions of the manufacturer shall apply.
Note
Due to continuous research and development
work, we reserve the right to make changes to
the technical content of this documentation.
REACh
REACh is a European Chemical Directive that
came into effect in 2007. As "downstream users"
and product manufacturers, we are aware of our
duty to provide our customers with information.
We have set up the following website to keep you
updated with all the latest news and provide you
with information on all the materials used in our
existing products: www.festool.com/reach
Publicité
