Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2
Ducted Venting Installation
10b
Install metal damper ring (10b) included
with the Hood.
10a
Install the damper flaps (10a) that are
included with hood by snapping the tabs
into place inside the top of the hood
before connecting ductwork.
Install Roof or Wall Cap purchased sep-
arately. Connect the 6" metal ductwork
to the Roof or Wall Cap and then attach
ductwork. Seal with foil tape.
Choose your ducting method
For Non-Ducted Recirculation venting route
the ductwork to a location above the hood
where the discharge is vented back into the
room.
Use the included Recirculation Vent Grill to
cover the opening. Secure the grill with the
2 screws provided in the Install Kit.
Fit a streight tube at least 15" in lenght from
the Hood air outlet to the wall unit.
Non Ducted -
Recirculation Option
12e
8
Required Charcoal Filter kit sku
#901531
Durable charcoal filter kit sku
#901532
9
Publicité
Table des Matières
