Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
The Hood can be installed directly on the underside of the wall
unit (Minimum 24" - 30" from the Cooking Surface).
Create an opening in the bottom of the wall unit, as shown.
Vf
Remove grease filters and set aside.
Screw the Frame into place using the 6 screws
12f(1/8"x5/16" torx), reconnect the wires to the
Connector) removed previously. Replace the
metal grease filters.
8
Insert the hood until the side supports snap into place.
Fasten using the 10 screws 12a provided.
Lock in position by tightening the screws Vf from underneath the hood.
Publicité
Table des Matières
