Maxspect Gyre 300 Série Mode D'emploi page 9

Water Flow Direction Adjustment
1. Rotate the flow cage to adjust the water flow direction.
2. The use of flow director can help to concentrate and increase roughly 10% water flow.
Connection of the system
When you have ONLY one Gyre. You need to connect it to line A to power both the Gyre

and the controller.
DO NOT use XF330's PSU on XF350, however XF350's PSU can be used on XF330.

Power Switch Adapter(sold separately) is a component features with two power source

cables, the one labeled in 24v connect to PSU, the other one labeled in 12v connect to
backup battery(self-prepared by user), when you have ONLY one Power Switch Adapter,
you need to connect it to line A to drive the Gyre connected by the same side.
Installation
7
EN