Manual Mode - Maxspect Gyre 300 Série Mode D'emploi

Turn ON/OFF the Gyre
Press the ON/FF button over 3s can turn on or off the appliance. While the appliance is
turned off, the Gyre will stop working, the indicators and OLED screen of the controller will
be shut down. However, if the appliance is connected to an ICV6 (sold separately), it can be
activated by the SYNA-G App.
Initialize the Gyre
Before running the Gyre, there are some basic settings you need to do for the system.
Note: The Gyre will be fixed on Constant Speed Mode in backup battery working mode.
1. Enter setup page.
2. Switch between settings.
Switch between Modes
Manual Mode: Manually set water movement mode
and flow level for your Gyre.
Auto Mode: A set of program with programable water
movement modes and flow levels which will be cycled
every 24hrs.
Auto Mode Preset: Two presets (LTC & OGC) allow user
to choose from the system.

Manual Mode

Main Interface
Setup Interface
Operating Instructions Operating Instructions
Set system clock.
Set model number for line A.
Set model number for line B.
Set flow level for backup battery working mode.
3.
4.
Current water movement mode.
Impeller rotation direction.
Instant flow level.
Flow level indicator.
1.
Enter setup page.
2.
Switch between settings.
Set parameter.
Save the setting.
3.
Set parameter.
4.
Save the setting.
EN
9