Maxspect Gyre 300 Série Mode D'emploi page 6

8. Read and observe all the important notices on the appliance.
9. If an extension cord is necessary, a cord with a proper rating should be used. A cord rated for
EN
less amperes or watts than the appliance rating may overheat.
Safety on Power Supply
1. Power Source – DO NOT defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding-type plug has two
blades and a third grounding prong. The wide blade or the third prong is provided for your
safety. If the plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
2. Power Cord Protection – The power supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them. Never take hold of the plug or
cord if your hand is wet, and always grasp the plug body when connecting or disconnecting it.
3. Installation – Install indoor only, and use the attachments and accessories provided and
specified by the manufacturer.
Safety on Magnet Mount
1. CAUTION - Very strong magnetic mount included in the package.
2. CAUTION - keep the magnet mount out of reach of children, as there is risk of severe personal
injury otherwise!
3. Handle the magnet mount with their proper handle, and DO NOT bring the both side together
directly. DO NOT put your fingers between the magnet mounts.
4. Magnet mount can attract metal objects, keep clear of metal objects when handling the
magnetic mount to avoid injuries.
5. Magnet mount can also damage electronic and magnetic storage devices such as USB storage
devices, pacemakers, credit cards, etc. Keep clear of these devices when handling the magnetic
mount to avoid damaging them.
Safety on Pulsing Motion generated by the Gyre System
1. Making pulses and waves with the Gyre System can place additional stress on the aquarium
glass/acrylic and its joints. Not all aquariums are able or designed to withstand this stress and
failure of the glass/acrylic and/or joints could result. Please consult with your aquarium
2. Manufacturer to determine if the aquarium construction is adequate to withstand the additional
stress generated by the pulses and waves motion. Please also check to assure that your
aquarium stand or furniture is properly leveled, which will help reduce the additional stress
resulting from wave generation.
3. Maxspect DISCLAIMS AND WILL NOT BE LIABLE FOR, damage to any aquarium or their
surroundings, water damage, or any other consequential damages resulting from wave
generation. MAKE PULSES AND WAVES AT YOUR OWN RISK.
4
Precautions