Settings
Canceling the DEMO Mode
You can cancel the demonstration display
which appears while this unit is turned off.
1
Press MENU, rotate the control dial
to select [DISPLAY], then press it.
2
Rotate the control dial to select
[DEMO], then press it.
3
Rotate the control dial to select
[DEMO-OFF], then press it.
The setting is complete.
4
Press
(back) twice.
The display returns to normal reception/
play mode.
Basic Setting Operation
You can set items in the menu to the
following procedure.
The following items can be set depending on
the source and setting.
1
Press MENU.
2
Rotate the control dial to select the
setup category, then press it.
Setup categories are follows:
GENERAL setup (page 11)
SOUND setup (page 12)
DISPLAY setup (page 12)
3
Rotate the control dial to select the
options, then press it.
To return to the previous display
Press
(back).
GENERAL Setup
CLOCK-ADJ (Clock Adjust) (page 6)
CAUT ALM (Caution Alarm)
Activates the caution alarm: [ON], [OFF]
(page 5). (Available only when the unit is
turned off.)
BEEP
Activates the beep sound: [ON], [OFF].
AUTO OFF
Shuts off automatically after a desired
time when the unit is turned off: [NO],
[30S] (30 seconds), [30M] (30 minutes),
[60M] (60 minutes).
AUX-A (AUX Audio)
Activates the AUX source display: [ON],
[OFF]. (Available only when the unit is
turned off.)
CT (Clock Time)
Activates the CT function: [ON], [OFF].
BTM (page 7)
11
GB