Product Components; Startup; Install The Battery - HYDROLAB HL4 Manuel D'utilisation

Product components

Make sure that all components have been received. Refer to
damaged, contact the manufacturer or a sales representative immediately.
Figure 2 Instrument components
1 AC power adapter
1
2 Calibration cable
3 HL4 sonde
2
4 D-cell battery
5 Mooring cap
1
Not for use in water. Instrument damage will occur.
2
Supplied with units with an internal battery pack
3
Supplied with some sensors.
4
The standard version is shown.

Startup

Install the battery

Explosion hazard. Incorrect battery installation can cause the release of explosive gases. Be sure that
the battery is of the approved chemical type and is inserted in the correct orientation.
For instruments with an internal battery pack, install the supplied D-cell battery. Refer to
6 English
Figure
6 Silicone grease packet
7 Sensor maintenance kit(s)
8 Hydrolab Operating Software CD
9 USB communications module
10 Sensor guard with weight
W A R N I N G
2. If any items are missing or
3
4
Figure 3.