How To Use The Charger - Max GS865E Manuel D'utilisation Et D'entretien

HOW TO USE THE CHARGER

The special purpose charger JC610M has the LEDs (green, red) which indicate the status of the charger
and Battery.
Green LED
1. ○ ON
2. ● OFF
3. ○ ON
4. Blinking
5. ○ ON
6. Blinking
The following cases are considered to be the troubles. Replace the charger and Battery with new ones.
● The green LED is not turned on if the power plug of the charger is plugged into a 110 V AC (for
household use) plug socket. (With the Battery unset)
※ Check with another electric appliance to see whether electricity is available at the plug socket.
● Neither green nor red LED is turned on or blinks if the Battery is set in the Charger.
● The green LED is not turned on 150 minutes after the red one has been turned on.
● The red LED is not turned on if the Battery is set in the charger.
Red LED
● OFF Power-on
○ ON Charging
● OFF Charge Completed
High temparature
Blinking
○ ON Battery alarm
Battery high
○ ON
temparature alarm
Troubles of Charger and Battery
Status
The charger has been plugged in. (Power-on status:
Battery unset)
The Battery is being charged.
The Battery has been completed charged.
The Battery is hot. (Remove it from the Charger and
alarm cool it down for a while before charging.)
The Battery is defective. (Replace it with a new one)
The Battery is defective and hot. (Replace it with a
new one.)
14
Description