AKG IVM1 Mode D'emploi page 24

Menu: Panorama
8 A c
█ █
EAR SND AMB STEREO RFCH
IVA
3. Press SELECT.
The display will change as follows:
Pan: L
8 A c
█ █
EAR SND AMB STEREO RFCH
IVA
4. To increase the spacing of the two L and R virtual monitors press
. (Pressing from the maximum position will return the spac-
ing to minimum.)
To decrease the spacing of the two L and R virtual monitors
press . (Pressing from the minimum position will return the
spacing to maximum.)
5. Having found the spacing you like best, press SELECT to save
the selection.
The display will revert to the main menu.
7.5.12. IVA Bypass at the PHONES Output
To listen to the unprocessed stereo signal on the transmitter you can
bypass the IVA processor at the PHONES output. The transmitted
signal, though, will still be processed by the selected Ear Preset.
Call up the "Phones" menu:
1. Press MENU.
2. Press or as many times as necessary to call up this
display:
Menu: Phones
8 A c
█ █
EAR SND AMB STEREO RFCH
IVA
3. Press SELECT to call up the menu commands:
Phones: >IVA<
8 A c
█ █
EAR SND AMB STEREO RFCH
IVA
4. The and keys toggle between the >IVA< and >BYPASS<
commands. To bypass IVA at the PHONES output select
>BYPASS<.
Phones: >BYPASS<
8 A c
█ █
EAR SND AMB STEREO RFCH
IVA
5. Press SELECT.
The display will revert to the main menu and the solid rectangle
above the " IVA" label will disappear. The PHONES output
will carry the unprocessed stereo signal.
06
LOCK
MENU
O
R
06
O
LOCK
MENU
06
LOCK
MENU
O
06
O
LOCK
MENU
O
06
O
LOCK
MENU
Custom Tight
8 A c
EAR SND AMB
O
SELECT
To activate IVA again repeat steps 1 through 5 and select
>IVA< in step 4.
O
7.5.13. Save Setup
The "Save Setup" menu allows you to save all the settings you sel-
ected in menus 7.5.1 through 7.5.13 (except IVA ON/OFF,
SELECT
Mute, Phones Bypass, Level, Testmode, IVA Demo, and Lock) as a
"Setup" at a common storage location. You may save, recall, and
delete a total of eight Setups.
Finding Free Memory Locations
1. Press MENU.
2. Press or
display:
Menu: Save Setup
8 A c
EAR SND AMB
3. Press SELECT.
If no Setups are stored yet the display will indicate a free stor-
age location ("Set: >1<"). In this case skip step 4 below.
Set: >1<
8 A c
EAR SND AMB
If Setups have been saved already the display will indicate the
name of the first stored Setup (e.g., "Wembley"). Continue with
step 4.
Set: >1< Wembley
O
8 A c
SELECT
EAR SND AMB
4. Press .
O
The display will indicate the next stored Setup. Press
many times as necessary to display a free storage location
(e.g., "Set: >2<"):
SELECT
Set: >2<
8 A c
EAR SND AMB
You can now assign a name to your Setup.
O
SELECT
Naming and Saving Setups
1. Press SELECT.
The display will indicate the number of the selected storage
location (in our example, ">S2<") followed by a cursor ("_").
06
█
STEREO RFCH LOCK
IVA
as many times as necessary to call up this
06
█ █
STEREO RFCH LOCK
IVA
06
█ █
STEREO RFCH LOCK
IVA
06
█ █
STEREO RFCH LOCK
IVA
06
█ █
STEREO RFCH LOCK
IVA
O O
O
MENU SELECT
O
MENU SELECT
O O
O
MENU SELECT
O O
O
MENU SELECT
as
O
O O
MENU SELECT
23