DVr stAtioN
configUring the "tV oUt" paraMeters
The wizard will help you configure the following settings. If you ever need to change these settings again, you can
always select "
Tools
" > "
Settings
"TV Connection"
-
select the type of video output ("
you have connected the DVR Station to your TV.
If you use the supplied cables, select "RGB" (for Europe) or "S-Video" (for US). If you use other cables, then select the correspond-
ing video output type.
"Resolution" *
-
select the resolution that best adapts to your TV: "
(720x576)
", or "
720p 16/9 (1280x720)
* This parameter only appears if you choose the "HDMI" TV connection mode.
"TV Standard" **
-
choose between the "
your country's television system).
"TV Format" **
-
4:3
16:9
"
" or "
" - the format used by your television set to display images.
-
Wide screen
the option "
** These parameters do not appear if you choose the "HDMI" TV connection mode.
"Audio Output"
-
defines whether the audio signal is sent out via the "
ing on how you have connected the DVR Station to your TV.
See chapter 3 ( TV Recording: Hardware Setup) to learn how to connect a tuner to the DVR Station in order to schedule
a TV recording (manually or via the TV Program Guide).
.3. using The arChOs inTerfaCe
Here are a few tips to use your ARCHOS while it is connected to the DVR Station.
sWitching the display BetWeen the archos screen and the tV
To switch the display of the ARCHOS between the built-in LCD screen and the TV, you can either press the
ton on the remote control or use the "
" > "
TV out
".
Composite
", "
"
NTSC (USA)
PAL (Europe)
" and "
" becomes available when you set the "
DVR Station
">"
S-Video
Component
", "
", "
VGA 4/3 (640x480)
480p 16/9 (720x480)
", "
" systems (select the one that is compatible with
TV standard
Analog Line-Out
", "
HDMI
Switch to TV out
" icon on the ARCHOS Home Screen.
User ManUal - version 1
RGB
HDMI
" or "
"), based on how
576p 16/9
" "
PAL (Europe)
" parameter to "
" or "
SPDIF
" interface depend-
".
TV
but-
8