Archos DVR Station Manuel D'utilisation page 5

DVr stAtioN
the reMote control reMote control
• If you are using the DVR Station to display the contents of the ARCHOS on your TV,
you will need to use the DVR Station's included remote control to navigate through the
ARCHOS interface.
• The DVR Station's infrared receiver is located on the front right side.
• Point the supplied remote control towards the infrared receiver to control your
ARCHOS device.
1. Navigational controls
Use the direction pad (left button) to move the cursor that appears on the screen. The
smaller button, next to it (on its right) acts as follows:
Navigation buttons: move from one item to another
.
Main buttons
Turns on the ARCHOS / puts it into standby mode
Tabs between available screens (for example: in the Web browser, the File browser or the
Music player)
Takes you directly to the ARCHOS Home Screen
Takes you back to the previous screen
Menu button: displays available menu options
-
press once: acts like a mouse's left button (depending on where you are in the
interface, it will allow you to open a link, execute a function, etc.).
-
hold: acts like a mouse's right button (on a web page, pressing this button will
display a contextual menu).
-
when you hold it and use the direction pad at the same time, it allows you to
move sliders or other dragging controls (as if you moved a mouse while holding
its left button at the same time).
User ManUal - version 1
5