Introduction; Safety Instructions - Omnitronic DMS-1050 Mode D'emploi

SCRATCH WORKSTATION
For your own safety, please read this user manual carefully
Every person involved with the installation, operation and maintenance of this device has to
- be qualified
- follow the instructions of this manual
- consider this manual to be part of the total product
- keep this manual for the entire service life of the product
- pass this manual on to every further owner or user of the product
- download the latest version of the user manual from the Internet

1. INTRODUCTION

Thank you for having chosen a OMNITRONIC DMS-1050 Scratch-Workstation. You have acquired a reliable
and powerful device. If you follow the instructions given in this manual, we can assure you that you will enjoy
this device for many years.
Unpack your OMNITRONIC DMS-1050.
Please make sure that there are no obvious transport damages. Should you notice any damages on the A/C
connection cable or on the casing, do not take the device into operation and immediately consult your local
dealer.

2. SAFETY INSTRUCTIONS

Be careful with your operations. With a dangerous voltage you can suffer a dangerous
electric shock when touching the wires!
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual.
OPERATING INSTRUCTIONS
DMS-1050
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
before your initial start-up.
CAUTION!
CAUTION!
18/56 10602425_V_1_0