Dépose Du Cadre En Verre Et D'installation - Fireplace Xtrordinair 564 HO NB GSR2 Manuel Du Propriétaire

Table des Matières

Publicité

Installation
44
Dépose du cadre en verre et d'installation
Attention: L'appareil doit être complètement refroidir avant de retirer le verre.
Attention: Ne pas frapper ou claquer la vitre.
Depending on the face being used, either:
a
1) Swing the access door down and remove the top grill, or
2) Remove the face by unscrewing it or lifting it off -- see
the instructions included with the face for details.
Open the 4 latches holding the glass frame in place,
starting with the bottom. Follow the instructions shown to the right.
Lift the glass frame up and
b
pull it forward to remove.
Re-Attaching the Glass Frame:
1) Hang the glass frame on the firebox.
2) While holding the frame in place, attach the upper latches
(follow the instructions to the right in reverse).
3) Lift the glass frame slightly and attach the lower latches.
NOTE: Make sure the glass frame is fully in place -- it should
be flush with the front of the fireplace when installed correctly.
Travis Industries
(pour les installateurs qualifiés uniquement)
NOTE:
You may need to lift
the glass frame
while re-attaching.
4170315
Top of
Firebox
Latch
Catch on
glass frame
Glass
100-01408-FR

Publicité

Table des Matières
loading

Table des Matières