Proper Use; Putting Into Operation - Beurer HK Comfort Mode D'emploi

– never operate without supervision,
– never switch on when folded or compressed,
– never wedge between objects,
– never make any sharp creases,
– never use with animals,
– never use when damp.
• When in use, the electronic components in the switch of the heating pad make the switch
slightly warm. The switch should therefore never be covered or placed on the heating pad
when it is being operated.
• Do not pull, twist or make any sharp kinks in the cables.
• Do not stick pins or pointed objects into this heating pad.
• This appliance may not be used by children unless the switch has been preset by a parent or
a supervisory person, or the child has been sufficiently instructed in how to use this heating
pad safely.
• Children should be supervised to ensure that they do not use the heating pad as a toy.
• Please check this heating pad frequently for signs of wear and tear or damage. If there are
signs indicating the above or if this heating pad was used improperly, it must be returned to
the manufacturer or retailer before further use.
• If the mains connection cable of this heating pad is damaged, it must be replaced by the ma-
nufacturer, its customer service department or a similarly qualified person to avoid any risk.
• Repairs may only be carried out by specially trained personnel or at an authorised repair
workshop, as special tools are required. Incorrect repairs may cause considerable danger to
the user.
• Should you still have questions on using our appliances, please contact our customer service.

2. Proper Use

This heating pad is designed for warming the human body. It allows you to apply targeted
warmth. Heat promotes the circulation and relaxes the muscles. This heating pad is not inten-
ded for use in hospitals or for commercial applications. In particular, it may not be used on
infants, small children, persons insensitive to heat, helpless persons or animals.
Our heating pads made of breathable microfleece are very adaptable and agreeable to the
skin. The detachable switch allows the pad to be cleaned in the washing machine (see cleaning
instructions).
When used for the first time, the heating pad may start to smell of plastic but this will soon go
away.
3. Operation
3.1 Safety
This heating pad has a SAFETY SYSTEM. This electronic sensor technology prevents the enti-
re surface of the heating pad from overheating by automatically switching off in the event of a
fault. If the safety system switches off the heating pad automatically as a result of a fault, the
indicator lamp is no longer illuminated even when the heating pad is switched on. Please note
that, after a fault has occurred, the heating pad can no longer be used for safety reasons and
must be sent to the service address indicated.

3.2 Putting into operation

First check that the switch is connected to the heating pad at the plug-in connection. Plug the
power cord into the mains outlet.
8