The Operation Procedure For Inputting Characters Manually - Pioneer BDP-330 Mode D'emploi

Settings
The operation procedure for
inputting characters manually
Numeric characters such as IP address can be
entered on the input screen using the number buttons
(0 to 9) or  and ENTER on the remote control.
IP Address 123
Netmask
Gateway
1
Press ENTER at the boxes in which characters
are to be entered, and the input screen will
appear.
Numeric
Edit
1 2 3 4 5 6 7 8 9 0
Selected by
pressing 
2
Press  to select the desired input mode.
3
Press the number buttons (0 to 9) or  to
select a number/character, then press ENTER.
Input character list
Numeric
Edit
*
50
Selected by
pressing 
1 2 3 4 5 6 7 8 9 0
Cancel Left
The same operation as RED, GREEN, BLUE, YELLOW and
selecting each of the items and pressing ENTER.
"Del.Char." stands for deleting characters.
4
Repeat the step 3 to display all of the desired
characters/numbers in the input field.
Example: The screen for inputting numeric characters
Numeric
Edit
NOTE
• Press RETURN (Del.Char.) to delete a number/
character you have input.
• To change a number/character you have input, press
GREEN (Left) or BLUE (Right) to select the number/
character you want to change, and press
(Del.Char.). Then, press  to select a new number/
character you want to input, and press ENTER.
5
Press YELLOW (Complete) to fix the numbers
which have been input.
IP Address
Netmask
Gateway
6
Repeat step 1 to 5 to finish inputting all the
required characters.
Right Complete Del.Char.
123
1 2 3 4 5 6 7 8 9 0
123
RETURN can be performed by
RETURN