Connecting To The Component Jacks - Pioneer BDP-330 Mode D'emploi

Connections

Connecting to the Component Jacks

You can enjoy accurate color reproduction and high quality images through the component jacks.
STEPS
1 Be sure to turn off this Player and the equipment before making any connections.
2 Firmly connect a component video cable (commercially available) to the component jacks ( and ).
Rear panel of this Player
To COMPONENT

VIDEO input jacks
(Red)
Red
(C )
R
(Blue)
Blue
(C )
B
(Green)
Green
Projector
Video equipment with component jacks
After connecting
• Connect audio equipment or the audio terminals of the TV. (Page 20)
18
USB
USB
Red
Blue
Green
To COMPONENT

VIDEO OUTPUT jacks
Component video cable
(commercially available)
AV receiver
TV
(Red)
CAUTION
• You need to select the priority video output in
(Blue)
"Settings" – "Audio Video Settings" – "Video Out
Select". (See page 45.)
• When the priority video output is set to "HDMI" in
(Green)
"Video Out Select", the video resolution which is
output from the COMPONENT VIDEO OUTPUT
jacks is the one set in "HDMI Video Out". (See
page 45.)
• When the output from the COMPONENT VIDEO
OUTPUT jacks is prioritized, set the priority video
to "Component".
STANDBY/ON
PQLS
This Player
NOTE
• Connect the Blu-ray disc player to TV
directly.
• When you record the program where copyright
is protected, the copy guard function is activated
automatically; the program can not be recorded
correctly. Also, the playback image via VCR may
deteriorate due to this function. However, this is
not a malfunction. When you watch the program
where copyright is protected, we recommend
that the Blu-ray disc player be connected to TV
directly.
HDMI OPEN/CLOSE FL OFF
USB
VCR TV