Operating On-Screen Menu; How To Operate The On-Screen Menu; Flow Of On-Screen Menu - Eiki LC-NB2 Mode D'emploi

OPERATING ON-SCREEN MENU

HOW TO OPERATE ON-SCREEN MENU
You can control and adjust this projector through ON-
SCREEN MENU. Refer to the following pages to
operate the each adjustment on the ON-SCREEN
MENU.
1 MOVING THE POINTER
Move the pointer (see the NOTE below) by pressing POINT
button(S) on the TOP CONTROL or the REMOTE
CONTROL.
2 SELECT THE ITEM
Select the item by pressing SELECT button.
NOTE : Pointer is the icon on the ON-SCREEN Menu to
select the item. See the figures on the section
"FLOW OF ON-SCREEN MENU" below.
Display ON-SCREEN MENU
1 Press MENU button to display the ON-SCREEN MENU
(MENU BAR). The red frame is the POINTER.
Select the Item
Move the POINTER (red frame) to the ITEM ICON that
2
you want to select by pressing POINT RIGHT/ LEFT
buttons.
Select the ITEM by pressing SELECT button. The
3
dialog box of the ITEM appears.
Control and adjust through ON-SCREEN MENU
Move the POINTER downward by pressing POINT
4
DOWN button. (The shape of POINTER become an
arrow.)
5 Move the POINTER to the ITEM that you want to adjust
and adjust the ITEM by pressing SELECT button.
Refer to the following pages for details of respective
adjustments.

FLOW OF ON-SCREEN MENU

BEFORE OPERATION
WIRELESS REMOTE CONTROL
TOP CONTROL
SELECT
MENU BAR
POINTER
SELECT
(red frame)
BUTTON
POINT
DOWN
BUTTON
POINT BUTTON
Used to move the
Pointer to UP/ DOWN/
RIGHT/ LEFT.
SELECT BUTTON
Used to select the item.
SELECT BUTTON
Used to select the item.
POINT BUTTONS
Used to move the
Pointer to UP/ DOWN/
RIGHT/ LEFT.
ITEM ICON
POINTER
(red frame)
MENU
GB
POINTER
17