Eiki LC-NB2 Mode D'emploi page 39

PRECAUTIONS AND SPECIFICATIONS OF THE SMARTMEDIA
SmartMedia is a precision device. Do not bend it, drop it, subject it
to strong forces or shocks or place where strong static electrical
charge can be generated.
Do not touch the surface of the Contact Area with fingers or allow it
to be stained with foreign materials. Store SmartMedia inside its
protective case when it is not used.
SmartMedia is a consumable item. The data may not be written in
or read from SmartMedia by using for a long time. In that case,
replace SmartMedia with new one.
Memory capacity : 8MB
Operating voltage : 3.3 V DC
Usage environment
Temperature : 0~55 °C (during use)
-20~65 °C (during storage)
Humidity : less than 95% (during use, during storage)
CAUTION
Write Protect Sticker is not available for PC. When PC attempts
to read the data from SmartMedia with Write Protect Sticker, it pro-
vides the error messages or the control of PC becomes insecure
because of the property of the interface. When the error messages
are displayed, press any key to return to the normal display. It is
recommended, however, SmartMedia should be used on PC with-
out Write Protect Sticker.
PRECAUTIONS AND SPECIFICATIONS OF THE PC CARD ADAPTER
Do not bend it, drop it, subject it to strong forces or shocks or place
where strong static electrical charge can be generated.
Do not insert materials other than SmartMedia. The adapter may
be damaged. Store PC Card Adapter inside its protective case
when it is not used.
Do not shake the adapter, turn off the appliances, or remove
SmartMedia from the PC Card Adapter during writing or reading
data. It may damage the data in SmartMedia.
Operating voltage : 5 V DC
Usage environment
Temperature : 0~55 °C (during use)
-20~65 °C (during storage)
Humidity : less than 95%
(during use, during storage)
This adapter can be adapted to only our SmartMedia indicated below.
Available SmartMedia : 3.3V / 5V, 2MB / 4MB / 8MB /16MB
Contact Area
Data is written in Contact Area. Never
scratch or stain this area.
Write Protect Area
Affix Write Protect Sticker onto Write
Protect Area to prevent from accidental
erasure.
Index Area
Affix Index Label onto Index Area.
MCI MODE
GB
39