3M PPS Manuel D'utilisation page 5

14. Clean the gun and adapter with appropriate materials and store appropriately.
15. Unscrew the 3M™ PPS™ Retaining Collar Shroud Assembly (6) by turning the ring counter-clockwise
and remove it from the 3M™ PPS™ Type H/O Pressure Cup (1).
16. Remove the 3M™ PPS™ Lid (5) and liner (4) and dispose of properly referring to the SDS and consulting
local regulations.
17. Clean the 3M™ PPS™ Type H/O Pressure Cup (1) and 3M™ PPS™ Retaining Collar Shroud Assembly
(6) by wiping with solvent and a lint free towel. Store in a clean, dry area.
Caution: Do not soak in solvent.
See your local 3M
Representative for
adapter type
3M™ PPS™ Type H/O
Pressure Cup
7
6a
6
5a
5
4
3
1
1a
1b
1c
2
Figure 2
Figure 1
Item # Description
1 3M™ PPS™ Type H/O
Pressure Cup (Large)
3M™ PPS™ Type H/O Pressure
Cup (Mini)
1a Pressure Hose Clip
1b Pressure Hose Port
1c Pressure Relief Valve
2 Pressure Hose
3 3M™ PPS™ Mix Ratio Film
Insert (Optional)
4 3M™ PPS™ Liner
5 3M™ PPS™ Lid
5a Lid Lock Tabs
6 3M™ PPS™ Retaining Collar
Shroud Assembly
6a Shroud Lock Tabs
7 3M™ PPS™ Plug
English - 4
3M™ PPS™ Mini
H/O Pressure Cup
See your local 3M
Representative for
adapter type
Component Listing
3M Part Number
PN 16124 - Large
PN 16121 - Mini
PN 16123
PN 16091 - Large
PN 16066 –Mini
PN 16024 (25 Lids and
Liners/Kit) – Large
PN 16114 (50 Lids and
Liners/Kit) – Mini
PN 16024 (25 Lids and
Liners/Kit) – Large
PN 16114 (50 Lids and
Liners/Kit) – Mini
PN 16124 –Large
PN 16121 –Mini
Included in PN 16024 –Large
PN 16114 –Mini