Specifications - Honda WX10T Manuel De L'utilisateur

36YH46000.book 40 ページ ２０１４年８月２８日 木曜日 午前１１時７分

12. SPECIFICATIONS

Model
Power equipment description code
Dimensions and Weight
Length
Width
Height
Dry mass (weight)
Engine
Model
Engine type
Displacement
[Bore×Stroke]
Engine Net power
(in accordance with SAE J1349*)
Engine Max. Net torque
(in accordance with SAE J1349*)
Engine oil capacity
Fuel tank capacity
Cooling system
Ignition system
PTO shaft rotation
*The power rating of the engine indicated in this document is the net
power output tested on a production engine for the engine model and
measured in accordance with SAE J1349 at 7,000 rpm (Engine Net
Power) and at 5,000 rpm (Engine Max. Net Torque). Mass production
engines may vary from this value.
Actual power output for the engine installed in the final machine will
vary depending on numerous factors, including the operating speed of
the engine in application, environmental conditions, maintenance, and
other variables.
Pump
Suction port diameter
Discharge port diameter
Total head (maximum)
Suction head (maximum)
Discharge capacity
Self-priming time
40
340 mm (13.4 in)
220 mm (8.7 in)
295 mm (11.6 in)
6.1 kg (13.4 lbs)
GX25T
4-stroke, overhead camshaft, single cylinder
25.0 cm
35.0×26.0 mm (1.38×1.02 in)
0.72 kW (1.0 PS)/7,000 rpm
1.0 N·m (0.10 kgf·m, 0.74 lbf·ft)/5,000 rpm
0.08 L (0.08 US qt, 0.07 lmp qt)
0.53 L (0.140 US gal, 0.117 lmp gal)
Forced air
Transistor magneto
Counterclockwise
25 mm (1.0 in)
25 mm (1.0 in)
37 m (121 ft)
8 m (26 ft)
120 L (32 US gal, 26 lmp gal) /min
80 sec/5 m (16.4 ft)
WX10T
WAGT
3
(1.53 cu-in)