Honda WX10T Manuel De L'utilisateur page 6

36YH46000.book 4 ページ ２０１４年８月２８日 木曜日 午前１１時７分
• The muffler becomes very hot during operation
• The engine exhaust system will be heated during
• Always make a pre-operation check (see page 11) before you start
the engine. You may prevent an accident or equipment damage.
• For safety, never pump flammable or corrosive liquids such as
gasoline or acid. Also, to avoid pump corrosion, never pump sea
water, chemical solutions, or caustic liquids such as used oil, wine,
or milk.
• Place the pump on a firm, level surface lest the pump should
overturn.
• To prevent fire hazards and to provide adequate ventilation, keep the
pump at least 1 meter (3 feet) away from building walls and other
equipment during operation. Do not place flammable objects close to
the pump.
• Children and pets must be kept away from the area of operation to
reduce a possibility of burns from the hot engine components.
• Know how to stop the pump quickly, and understand the operation
of all controls. Never permit anyone to operate the pump without
proper instructions.
• Never run the engine in an enclosed or confined area. Exhaust gas
contains poisonous carbon monoxide gas; exposure can cause loss of
consciousness and may lead to death.
• Before each use, look around and underneath the engine for signs of
oil or gasoline leaks.
4
and remains hot for a while after stopping the
engine. Be careful not to touch the muffler while it
is hot. Let the engine cool before storing the
water pump indoors.
operation and remain hot immediately after
stopping the engine.
To prevent scalding, pay attention to the warning
marks attached to the water pump.