Attaching the front panel
Attach part A of the front panel to part B of the
unit as illustrated and push the left side into
position until it clicks.
B
Notes
• Do not put anything on the inner surface of the front
panel.
• Do not detach the front panel during the eject
operation. If the front panel is detached during eject,
operation will stop.
To remove the disc with the front panel detached:
through hole C, press Z (OPEN/CLOSE) inside
the unit with a pointed object, such as a ball-
point pen.
C
A
Initial settings
The following settings are required before you
operate the unit for the first time, after replacing
the car battery, or changing the connection. If the
date or the time on the unit is not set correctly,
the HDD may trace the playback history
incorrectly.
1
Press the RESET button (page 8).
2
Attach the front panel (page 9).
3
Rotate the R dial to select AM Step
"9K" or "10K," then press the R dial.
The AM (FM) tuning interval is factory-set to
"10K."
If the frequency allocation system of your
country is based on 9 kHz (50 kHz) interval,
set to "9K."
4
Set the date and time.
1 Rotate the R dial to select the year,
then press the R dial.
2 Rotate the R dial to select the
month, then press the R dial.
3 Repeat steps 1 and 2 to set the day,
hour, minute.
The set date and time are displayed and the
clock appears.
When you set the date and time after
the initial settings
Press (MENU) and select "Time Set" in "Setup,"
then press the R dial.
Tips
• The clock uses a 12-hours digital indication.
• The "AM" or "PM" indication is automatically
switched depending on the set hour.
• The indication of a day of the week changes
automatically according to the date.
• If you press (F1) in step 4, the cursor moves to the
previous item.
9