Delete Data - Hach sensION+ MM374 Manuel D'utilisation

1. From the main menu use the
confirm.
2. Use the or to select Display data and confirm.
3. Use the or to select
Option Description
Measurement data Measurement data—stores automatically each time a
sample is measured
Electrode report Electrode report—stores automatically the electrode
history and measurement conditions
Calibration data Calibration data—stores automatically the current
calibration

Delete data

The entire measurement data or electrode report log can be deleted to
remove data that has already been sent to a printer or PC.
1. From the main menu use the
confirm.
2. Use the or to select Erase and confirm.
3. Use the or to select Measurement data or Electrode report and
confirm. Confirm again to delete the data.
The entire log is deleted at once.
Send data to a printer or to a computer
N O T I C E
The data output (printer or PC) needs to be selected first, so that the Print menu
is available (refer to Select the data output
Note: Refer to Report output on page 14 to select the report output type.
1. From the main menu use the
confirm.
2. Use the or to select Print and confirm. Select one of the
following options and confirm with
14 English
or to select DATA LOGGER and
or to select DATA LOGGER and
on page 12).
or to select DATA LOGGER and
to print the data: Measurement
data, Electrode data, Calibration data, Calibration report or
Instrument condit.
Report output
N O T I C E
The data output (printer or PC) needs to be selected first, so that the Type of
report menu is available (refer to Select the data output
Different report output types can be selected when a printer or a PC is
connected.
1. From the main menu use the
2. Use the or to select Type of report and confirm.
3. When a printer or a computer and Terminal is connected, use the
or to select
Option Description
Reduced Select Several or One sample as an output format
on page 12).
or to select SYSTEM. Confirm.