Authorized Service - LGB 27510 Instructions De Service

General programming procedure
with 55015 Universal Remote:
- Registers CV1 through CV4 can be
programmed directly by programming
the desired function value in the reg-
ister.
- To program higher CVs:
- In register CV6, input the number of
the register you want to program.
- Then input the desired function value
in register CV5.
Example:
Set hand-over function to ON (program
register CV54 to function value 3).
To program:
- Display shows "P --"
- Select register CV6 (press 6).
- Input 54 (register you want to pro-
gram).
- Execute programming (press right
arrow button).
- Display shows "P --"
- Select register CV5 (press 5).
- Input 3 (selected function value)
- Execute programming (press right
arrow button).
When programming with the 55045, all
function values are programmed
directly.

AUTHORIZED SERVICE

Improper service will void your warranty.
For quality service, contact your author-
ized retailer or the LGB factory service
station:
Gebr. Märklin & Cie. GmbH
LGB Service-Abteilung
Stuttgarter Straße 55 - 57
73033 Göppingen
Deutschland
CAUTION! This model is not for children
under 15 years of age. This model has
small parts, sharp parts and moving
parts. Save the supplied packaging and
instructions.
Products, specifications and availability
dates are subject to change without
notice. Some products are not available
in all markets and at all retailers. Some
products shown are pre-production
prototypes.
15