Installation Instructions - Westfalia 305 226 391 101 Instructions De Montage

20. Unlock the following wires from the 32-pin plug and install them in the black and white 3-pin
plug housing (the wires can be found on the mating plug of the cable harness with the red 12-
pin plug):
Orange/brown wire from compartment 1 into compartment 3 of the black plug housing.
-
Orange/green wire from compartment 17 into compartment 1 of the black plug housing.
-
Blue wire from compartment 19 into compartment 3 of the white plug housing.
-
Red/black wire from compartment 20 into compartment 2 of the white plug housing.
-
Black wire from compartment 21 into compartment 1 of the white plug housing.
-
21. Install the single wires from the cable harness with the 12-pin plug in the free compartments
of the 32-pin plug, ensuring that the colours match.
22. Push contact support into the cap and push on the lilac latch.
23. Connect the 32-pin plug (blue) to the rear control unit (ILM) (Fig. 5/1).
24. Connect the black and the white plug housings with each other.
Installing the fuses
25. Install the supplied fuses in the free positions 6, 7, and 8 (10, 11 and 12) of the fuse holder
(Fig. 4/3).
Position
6 / 10
7 / 11
8 / 12
26
Amperes Function
15 Trailer socket, pin 9
15 Trailer power supply, left
15 Trailer power supply, right
305 226 391 101 - 001 - 06/06

Installation instructions:

Electrical system for towing hitch
Audi A8