Connecting the trailer module
1
Fig. 4: Connecting the trailer module
12. Fasten the trailer module in the right-hand corner of the luggage trunk with two fastening
screws (M5x10) below the battery holder plate (Fig. 4/1).
16-pin connector to the
trailer control unit
Figure
13. Locate the 16-way socket housing of the cable set in the socket provided on the trailer
connection unit. Wind the excess cable loop into a coil (see figure) near to the trailer
connection unit and secure to the vehicle cable loom using the cable ties supplied.
24
3
4
2
305 226 391 101 - 001 - 06/06
Installation instructions:
Electrical system for towing hitch
to the trailer socket
Audi A8