Oase Neptun 1600 Notice D'emploi page 3

- English -
Intended use
Neptun 1600/2600, referred to in the following as "unit", may only be used as specified in the following:
• For pumping clear water used for indoor and outdoor fountain pumps, table fountain pumps and statues.
• For operation with clean water.
• Operation under observance of the technical data.
The following restrictions apply to the unit:
• Do not use in swimming ponds.
• Never use the unit to convey fluids other than water.
• Never run the unit without water.
• Do not use in conjunction with chemicals, foodstuff, easily flammable or explosive substances.
• Do not connect to the domestic water supply.
Use other than that intended
This unit can be dangerous and cause harm if not used in accordance with these instructions. Any use not in accordance
with these instructions or modification(s) to the unit will void the limited warranty.
Installation
Important:
● The unit can be placed submerged or inline.
● Always place the unit below water level.
General preparatory work
1. Bolt on the suction unit and fit the pressure
socket.
2. Connect the desired hose for the water
feature to the pressure socket.
● Adapt stepped hose connectors to the
water supply and return in accordance
with the hose diameter.
3. Remove the pump foot, if necessary. For
this purpose, press the pump foot to the
rear, as illustrated.
Attention! Dangerous electrical voltage.
Possible consequences: Death or serious injuries.
Protective measures:
• Prior to reaching into the water, disconnect the power supply to all units used in the water.
• Disconnect the power plug prior to carrying out work on the unit.
Questions, problems, missing parts?
Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email
us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com
3.
3