Connecting The Receiver To The Power Supply - Alpine EZi-DAB-GO Manuel D'utilisation

Connecting the receiver to the power supply

10
Plug the EZi-DAB-GO power adapter into the 12V accessory socket
and then plug the USB power cable from the receiver into one of
the adapter's USB ports.
Note: Cigarette lighter and power sockets can vary between
car makes and models. Ensure the power adapter is completely
inserted and is firmly held in position.
Note: Other electronic devices can interfere with EZi-DAB-GO's
DAB performance, for best results only use the supplied
EZi-DAB-GO power adapter to power the receiver.