Mp3 (Cde-9846 Only); Playing Mp3 Data (Cde-9846 Only); External Device Connecting To An External Amplifier - Alpine CDE-9846 Mode D'emploi

MP3 (CDE-9846 only)

Playing MP3 Data (CDE-9846 only)

CDE-9846:
CD-DA (Initial setting) / CDDA/MP3
This product can playback CDs containing both CD and MP3 data.
However, in some situations (some enhanced CDs), playback may be
difficult. For these special cases, you can select playback of CD data
only. When a disc contains both CD or the MP3 data, playback starts
from the CD data portion of the disc.
CD-DA : Only CD data can be played back.
CDDA/MP3 : Both CD data and MP3 file tracks can be
played back.
• Perform this setting before inserting a disc. If a disc has already
been inserted, perform the setting after you remove the disc.
External Device
Connecting to an External Amplifier
PWR ON (Initial setting) / PWR OFF
When an external amplifier is connected, sound quality can be
improved by stopping the power supply of the built-in amplifier.
PWR OFF : Use this mode when the pre-amplifier of the unit
are used to drive an external amplifier connected
to the speakers. In this setting, the head unit's
internal amplifier has no output to drive speakers.
Amplifier
PWR ON : The speakers are driven by the built-in amplifier.
SPEAKER
RIGHT FRONT
SPEAKER
RIGHT REAR
SPEAKER
LEFT REAR
SPEAKER
LEFT FRONT
• No sound is produced by the system when the power output is set to
OFF.
Front
left
Front
right
Speakers
Front
right
Rear
right
Rear
left
Front
left
17
-EN