Sefa ROTEX AIR V3 Série Manuel Utilisateur page 10

2021-03-25
f� Operating cycle
Rotex Air Lite
1.
2.
3.
4.
5.
6.
7.
8.
Pressing the on-screen stop button during a cycle will stop the cycle.
Rotex Air Pro
1.
2.
3.
4.
5.
6.
8.
9.
Pressing the on-screen stop button during a cycle will stop the cycle.
10
Place the work item on the lower platen.
Position the transfer sheet correctly.
Move the arm over the platen you are working on.
Press and hold both dual-handed buttons.
The heat platen will lower and start the timer.
The heat platen will lift open when the timer has finished.
Move the arm to the right clear of the work surface.
Repeat from step 1 above.
Place the work item on the lower platen.
Position the transfer sheet correctly.
Move the arm over the platen you working on.
Press and hold both dual-handed buttons.
The heat platen will lower and start the timer.
The heat platen will lift open when the timer has finished.
The arm will swing out to the side automatically.
Repeat from step 1 above.
www.sefa.fr