Sefa ROTEX AIR V3 Série Manuel Utilisateur page 13

0
0
°C -30< <+30
f� Other settings
The green leaf icon is used to set energy-saving mode.
The operator can use two energy-saving modes :
- Hibernate
▶ Hibernate start time
▶ Heating restart time
- Sleep
▶ Sleep temperature (40°C (104°F) to 140°C
(284°F))
▶ Idle time before sleep mode
The board will only switch to eco mode if it is on the home
screen. If the user leaves the press on another screen, the
screen is presumed to be in the process of being altered. Sim-
ply touch the screen or start a cycle to exit energy-saving mo-
des that are currently running.
The "i" at the top right provides key information about the sof-
tware version and SEFA contact details.
The diagnostic button brings up the machine status so you
can see if there are currently any malfunctions. If there are,
contact your distributor.
www.sefa.fr
User guide - SEFA ROTEX AIR V3 Series
Switch the sound on or off. Warning sounds will still be emitted if needed.
Switch the 2-second end-of-cycle notification signal on or off.
Internal clock setting (date and time).
Choose between Celsius or Fahrenheit.
Choose 1 (OFF), 2 or 4 different timers.
Operating temperature range setting.
Switch the left platen membrane on or off (Duplex Air Pro).
Left membrane inflation time before platen down (Duplex Air Pro).
Left membrane deflation time before platen up (Duplex Air Pro).
Switch the right platen membrane on or off (Duplex Air Pro).
Right membrane inflation time before platen down (Duplex Air Pro).
Right membrane deflation time before platen up (Duplex Air Pro).
Screen backlight setting.
Duplex Pro/Air Pro: dwell time before platen switch (Auto mode).
13