Sefa ROTEX AIR V3 Série Manuel Utilisateur page 9

c� Selecting a working direction
This press is fitted as standard with a lower platen mount that pivots through 180° so
that you can thread the workpieces on from the front or back.
To fit the mount the other way:
- Undo the 2 thumbscrews between the mount and the lower platen.
- Turn the mount around 180°.
- Tighten the 2 thumbscrews underneath the lower platen
d� Auto-swing (pro version)
1.
2.
3.
e� Changing the work platen
There are two placement guides on the underside of the lower platen to place your
hands on and make the platen easier to lift off for changing.
Lockpin
www.sefa.fr
180 ° Rotation
Pivot the head of the machine as far as it will go to the right
Enable the auto-swing system by turning the cover and pressing the
button.
Disable the auto-swing system by pivoting the head of machine as far as
it will go to the right, turning the cover and pressing the button.
User guide - SEFA ROTEX AIR V3 Series
Thumbscrews
Placement guides
9