Sefa ROTEX AIR V3 Série Manuel Utilisateur page 12

2021-03-25
c� Item counter
This menu shows how many items the machine has printed.
When you click on this icon, two counters are displayed. See
the table below.
You can also select the operating mode on Duplex models:
single-platen, dual-platen actuated by button/pedal for each
press stroke, and dual-platen auto mode.
The first counter shows the partial count and can be reset to
zero by pressing the arrow to its right.
The second counter shows the total number of items printed
since the machine was installed. This count is permanent and
cannot be reset.
d� Recipes
Pressing the "Recipes" icon (d) brings up the menu shown
opposite.
Use the left and right arrows to select one of the 10 pre-confi-
gured recipes. To use (load) a recipe, press the floppy disk icon
with the arrow pointing to the right. Once selected, press the
arrow in the bottom left corner to return to the main menu.
To create or alter a recipe, you must first set the time and
temperature from the main screen and then select a memo-
ry slot (1 to 10) from the recipe (d) screen. To rename a recipe,
press the pencil icon. Give your recipe a name and press the
arrow in the bottom right corner to confirm. To finish, press
the floppy disk icon with the arrow pointing to the left to save
your choice/setting.
An asterisk(*) at the start of the name of the current recipe on
the indication bar means that the current settings are not the
same as the original settings for this recipe, and the settings
that are currently being applied have not been saved to the
recipe.
e� Settings
Press icon (e) in the main menu to go to the machine set-
tings. There are 6 available options.
The gear wheel button lets you change the machine's tech-
nical aspects.
12
190°C TEXTILE
001502
25°C
0:10 0:20
0:10
0:05 0:15
001502
141003
190°C TEXTILE
001502
25°C
0:10 0:20
0:10
0:05 0:15
1: HOTMARKPRINT REV
195°C RIGID
02:00 02:00 02:00 02:00
www.sefa.fr