External Digital Sources; Digital Input - Cambridge Audio azur 740C Manuel D'utilisation

Programming disc play
1. Ensure that a disc is loaded and the player is in Standby mode.
2. Press Program on the remote control. The Program set-up will appear
in the display.
3. Using the Skip/Scan (Skip on the remote) buttons, skip to the track
number that you want to program as your first track (or press the
actual track number on the remote).
4. Press Program. The desired track is now entered and the program
number increases by one.
5. Repeat steps three and four until all your desired tracks are entered.
6. Press Play. The programmed tracks will play.
7. You can use the Skip and Search functions on your remote control to
move through your programmed selection in the same way as normal
playback.
8. Pressing Stop once will stop play and pressing Stop twice at any time
will wipe the program and return the player to stopped mode.

External digital sources

To access external digital sources connected to the rear of the 740C,
press the Select button (on front panel or remote) to change between
CD playback, Digital Input 1 and Digital Input 2.
Manufactured in an
ISO9002 approved facility
Caution On Power Off Control Bus IR Emitter
Risk of electric shock.
Do not open. In Out In
Avis
Risque de choc electrique.
Ne pas ouvrir.
Achtung
Vorm öffnen des gerätes.
Netzstecker ziehen.
Manufactured in an
Power
ISO9002 approved facility
Designed in London, England
This device complies with
part 15 of FCC rules
On Off
azur 740C Upsampling
Compact Disc Player
Caution
Risk of electric shock. Power Rating: 230V AC ~ 50Hz
Do not open.
Max Power Consumption: 25W
IR Emitter Control Bus Digital Outputs
Avis
Risque de choc electrique. Power AC
Ne pas ouvrir.
Achtung
Vorm öffnen des gerätes.
Netzstecker ziehen.
In In Out S/P DIF Toslink
Co-axial Optical
AЯ 46
Standby / On Menu
CD playback
The 16 bit/44.1kHz sampling data on a standard CD is upsampled to 24
bit/384kHz for best possible sound quality.

Digital Input 1/2

Press Select again to select Digital Input 1.
The incoming word length (16 to 24 bit) and sample rate will be
displayed along with the indication that the data is being upsampled to
24 bit/384kHz. Note that rather than exact word width, some sources
report data as either 20 bit maximum (displayed as < = 20) or 24 bit
maximum (displayed as < = 24).
If no digital signal is present, the display will show "UNLOCKED" and the
output will be muted.
Press Select again to select Digital Input 2.
azur 740C
Designed in London, England
azur 640T DAB/FM Tuner V2.0
Digital Outputs 640T
Left
Power Rating: 230V AC ~ 50Hz
Max Power Consumption: 15W
V2.0
Right
www.cambridge-audio.com
Aerial
Input
Line Output Toslink S/P DIF
50 Ohms
Optical Co-axial
N1863 F-Type
Incorporating Q5 ™ from:
ANAGRAM
TECHNOLOGIES
Digital Inputs 1 Digital Inputs 2 Class 1 Laser Product
Left Luokan 1 Laserplaite
Klass 1 Laserapparat
Right
740C
S/P DIF Toslink S/P DIF Toslink Line Output
Co-axial Optical Co-axial Optical
www.cambridge-audio.com
Select
9