D. Program Lock
To Activate Program Lock:
This procedure locks the Memory Pads into their programmed heating times and power levels.
DO NOT OPEN THE DOOR.
PAD
1.
NOTE: • In "Program Lock"
a. The oven is started by pressing the desired Memory Pad. There is no need to press the Start Pad.
b. The oven cannot be programmed until the Program Lock is released.
To Release Program Lock:
This procedure releases "Program Lock" and activates all other features. The Oven reverts to a 2 touch
operating mode (Memory Pad plus Start Pad).
DO NOT OPEN THE DOOR.
PAD
1.
+
NOTE: • ln "Program Unlock"
a. Repeat and interrupt features are operational.
b. Memory Pads can be programmed.
c. Beep Tone can be set On or Off.
NE-1037_EYG.indb
19
How to Operate
• The display window must show "0".
• Press and hold the Program Pad (for 5 seconds)
until the display shows "P" and "L".
• Program Lock feature is now activated.
• The display window must show "0".
• Press the Stop/Reset Pad.
While pressing this pad, press the Program Pad
(for 5 seconds) until the display shows "P".
• Program Lock feature is now released.
- 19 -
INSTRUCTION
INSTRUCTION
2020/11/25
10:37:22