Programmed Heating - Panasonic NE-1037 Mode D'emploi

B. Programmed Heating
Example: 1 stage; Memory Pad 9 to heat for 3 minutes at 1000 W
PAD
1.
2.
3.
Beep tone will sound.
(See page 21)
Example: 2 stages; Memory Pad 3 to heat for 3 minutes at 1000 W and 2 minutes at 340 W
PAD
1.
2.
3. Beep tone will sound.
(See page 21)
For Double Quantity Heating
The Double Quantity (x 2) Pad is preset at the factory to automatically double the programmed time for double
quantity heating. (See page 18 for programming the Double Quantity (x 2) Pad.)
Example: Memory Pad 5
PAD
1.
2.
3.
4. Beep tone will sound.
(See page 21)
NE-1037_EYG.indb 15
How to Operate
• Press the Memory Pad 9. In Program Lock Mode
the oven will start without pressing the Start Pad.
(See page 19)
• Press the Start Pad.
Heating will start. The time on digital display will
count down.
• All heating will stop. When opening the door, the
display will stop blinking.
• Press the Memory Pad 3. In Program Lock Mode
the oven will start without pressing the Start Pad.
(See page 19)
• Press the Start Pad.
The total time for both stages will be displayed. The
time on digital display will count down. Heating will
start.
• When the oven shifts to the next stage, a single
beep tone will sound.
• All heating will stop. When opening the door, the
display will stop blinking.
• Press the Double Quantity (x 2) Pad.
• Press the Memory Pad 5. In Program Lock Mode
the oven will start without pressing the Start Pad.
(See page 19)
• Press the Start Pad.
Heating will start. The time on digital display will
count down.
• All heating will stop. When opening the door, the
display will stop blinking.
- 15 -
INSTRUCTION
INSTRUCTION
INSTRUCTION
2020/11/25 10:37:19