Publicité
Les langues disponibles
Les langues disponibles
1. Applications
The SE 630 conductivity sensor is a 2-electrode sensor for measuring low to
medium conductivity values also at high pressure and elevated temperature.
The sensor consists of corrosion-resistant materials (graphite electrodes and
PES body). A temperature detector is integrated in the sensor. Preferred fields
of application are water, moderately polluted wastewaters, process solutions
with medium conductivities; also corrosive media.
2. Package contents
- SE 630 conductivity sensor
- Instructions for use
2. Dimension drawing
16
Polyethersulfone
3. Calibration / Adjustment
Remove sensor, clean, rinse, and dry it, then immerse it in a calibration solu-
tion. Suitable calibration solution
cm).
Perform a product calibration if the sensor can or shall not be removed.
Observe instruction manual of meter. The cell constant of the sensor can be
certified by the manufacturer (ZU 0320). For that purpose, you must send in the
sensor.
8
151
79
18
G 1"
ZU 0348 (12.88 µS/cm), ZU 0349 (1413 µS/
W 36
Connecting plug
Ø 7
Publicité
