Usb-Port - Rohde ST 410 Notice D'utilisation

Contents
1 Features
2 Introduction
3 At a Glance
4 Quick Start Guide
5 Turning On
6 Programming
7 Altering a Program
8 Firing
9 Cooling
10 Operating Notes
11 Adjusting While Firing
12 USB Interface for Data Logging
13 Error Messages
14 Other Features
15 Sample Ceramics Programs
1. Features
• 16 programs each with up to 32 segments
• 1 controlled heating / cooling ramp + soak per segment
• Soak periods up to 99 hours 59 mins
• Ramp rates from 1 to 999°/ hour + FULL
• Ideal for glass or ceramics use
• Programs can be altered while fi ring
• Program pause and advance facilities
• Keyboard lockable
• Delayed start facility - up to 99 hours 59 mins
• Power failure recovery
• Energy used display
• Setpoint display
• Alarm buzzer
• °C/°F operation
• USB interface for data logging
22
2. Introduction
22 You have chosen an ST 410 controller, a high-quality product. This controller
23 incorporates the latest technological features and is the leader in its class.
23
24 After reading this manual you will be familiar with the functionality of the ST 410
25 controller. Please make sure that you fully understand the kiln manufacturer's
26 safety instructions.
27
28 Make sure that the controller is mounted at a safe distance from the kiln and is
29 not exposed to direct heat from exhaust air or radiation from the kiln.
30 Do not place the controller on top of the kiln.
31
32
35
38
40
3. At a Glance
1 USB Port
2 Main display
3 Temperature icon
4 Ramp rate icon
5 Time icon
6 Kiln heating indicator
7 Segment display
8 Mimic display
9 Firing indicator
10 Start/Stop key
11 Control keys
12 Fuse
13 Power ON/OFF switch
1
3
2 4
5
6
8
7
9
10
11
12 13
23