a
a. Spark plug gap
a. Ecartement des électrodes
a. Separación entre electordos de la bujía
1. Spark plug wrench
1. Clé spéciale
1. Llave de bujías
Before installing the spark plug, measure the
electrode gap with a feeler gauge and adjust to
specification.
Spark plug gap:
When installing the spark plug, always clean the
gasket surface and use a new gasket. Wipe off
any grime from the threads and tighten to the
specified torque.
q
Tightening torque:
8-29
0.6 ~ 0.7 mm
Spark plug:
12.5 Nm (1.25 m0kg)